https://ogma.newcastle.edu.au/vital/access/ /manager/Index ${session.getAttribute("locale")} 5 https://ogma.newcastle.edu.au/vital/access/ /manager/Repository/uon:17022 Wed 11 Apr 2018 14:23:09 AEST ]]> https://ogma.newcastle.edu.au/vital/access/ /manager/Repository/uon:54466 Tue 27 Feb 2024 13:57:41 AEDT ]]> https://ogma.newcastle.edu.au/vital/access/ /manager/Repository/uon:46656 Mon 29 Jan 2024 18:02:50 AEDT ]]> https://ogma.newcastle.edu.au/vital/access/ /manager/Repository/uon:48507 4C₃ which would diminish the amount of Al available to act as a PCM. This work presents the effects of extended thermal cycling over the intended use range to test its effect on integrity, phase composition and microstructure of the two candidate materials. A small initial mass loss from the 5 g samples due to the loss of metal particles directly in contact with the surface was observed and which had stabilised after 50–100 cycles. The mass loss is accompanied by a small thermal capacity loss in DTA which also stabilised in the first 50–100 cycles. Both the mass loss and capacity reduction are expected to be greatly reduced in full scale storage modules due to the much smaller surface area to volume ratio (∼0.1) compared with that for the samples used here (∼4). The absence of X-ray diffraction peaks from the carbide Al₄C₃ in data from the cycled materials and their continued strong latent heat DTA signal strongly suggest that the materials are suitable for long-term use in thermal energy storage applications.]]> Mon 20 Mar 2023 16:11:23 AEDT ]]>